ALL COURSES
Depending on which course is chosen, it will be conducted via either Self-paced online, Trainer led via Zoom or in the Classroom.
A one day practical at our training facility is included if you have enrolled in the install portion of any course.
** Please see below under each ‘Delivery Method and Duration’ tab for further information about your chosen course.
*Start now to get immediate access to your course material.
Grid-Connected PV Systems (Design & Install)
In accordance with the Australian Quality Framework, Smart Solar Training is fully committed to ensuring quality education for all students.
In accordance with the requirements of the Outcome Standards for Registered Training Organisations, Smart Solar Training provides the opportunity for students to apply to have prior learning recognised toward a qualification or units of competence for which they are enrolled.
However, please note that Solar Accreditation Australia, the national accreditation scheme operator does not recognise RPL’d candidate records.
Our organisation does not offer entry-level VET sector training.
An unrestricted electrical licence issued by an Australian state or territory is a prerequisite for enrolment in this course.
Please contact us should you wish to discuss your options / possible alternate pathways or visit the Solar Accreditation Australia website for further details.
This course consists of two main components, a Theory and a Practical (held at our training facility)
Options:
- Self-paced online Theory + One day Practical or ..
- Four days Trainer led online via Zoom Theory + One day Practical or..
- Four days Face to face Classroom Theory + One day Practical
Although it is not mandatory, we recommend completing around 50% self study before attending the training. Some self study will be required with training tutor support included with all our courses.
To support your study planning, please refer to the information below, including the nominal hours as outlined for all units for this course.
Total Nominal Hours: 80
In the context of Registered Training Organisations (RTOs) and Vocational Education and Training (VET), “nominal hours” refer to the anticipated time needed to deliver and assess a unit of competency or module.
You may take longer to complete your unit of competency/competencies or you may take less depending on your experience and any previous training.
The nominal hours is published as a general guide for your information and guidance.
*Start now to get immediate access to your course material.
The validation period of our courses is twelve (12) months.
Students are responsible for obtaining current copies of the following Australian Standards, available for purchase online, and also available from some libraries, institutions and industry associations.
An example of a curated, affordable set of applicable standards here: Standards
- AS/NZS 5033 – Photovoltaic arrays
- AS/NZS 4777.1 – Grid connection of energy systems via inverters
- AS/NZS 3000 – Wiring rules
- AS/NZS 3008.1.1 – Selection of cables Part 1.1
Students enrolled in the course must ensure that they have:
- Computer with a reliable Internet connection
- Scientific calculator
- Email account which they check regularly
Grid-Connected PV Systems (Design Only)
In accordance with the Australian Quality Framework, Smart Solar Training is fully committed to ensuring quality education for all students.
In accordance with the requirements of the Outcome Standards for Registered Training Organisations, Smart Solar Training provides the opportunity for students to apply to have prior learning recognised toward a qualification or units of competence for which they are enrolled.
However, please note that Solar Accreditation Australia, the national accreditation scheme operator does not recognise RPL’d candidate records.
Our organisation does not offer entry-level VET sector training.
Students are responsible for obtaining current copies of the following Australian Standards, available for purchase online, and also available from some libraries, institutions and industry associations.
An example of a curated, affordable set of applicable standards here: Standards
- AS/NZS 5033 – Photovoltaic arrays
- AS/NZS 4777.1 – Grid connection of energy systems via inverters
- AS/NZS 3000 – Wiring rules
- AS/NZS 3008.1.1 – Selection of cables Part 1.1
Students enrolled in the course must ensure that they have:
- Computer with a reliable Internet connection
- Scientific calculator
- Email account, which they check regularly
This course consists of a Theory component only.
Options:
- Self-paced online Theory or ..
- Four days Trainer led online via Zoom Theory or ..
- Four days Face to face Classroom Theory
Although it is not mandatory, we recommend completing around 50% self study before attending the training. Some self study will be required with training tutor support included with all our courses.
To support your study planning, please refer to the information below, including the nominal hours as outlined for all units for this course.
Total Nominal Hours: 70
In the context of Registered Training Organisations (RTOs) and Vocational Education and Training (VET), “nominal hours” refer to the anticipated time needed to deliver and assess a unit of competency or module.
You may take longer to complete your unit of competency/competencies or you may take less depending on your experience and any previous training.
The nominal hours is published as a general guide for your information and guidance.
*Start now to get immediate access to your course material.
The validation period of our courses is twelve (12) months.
This course has a prerequisite for enrolment, a Statement of Attainment in one of the following Units of Competency :
- One of:
- UEEEL0039 Design, install and verify compliance and functionality of general electrical installations or
- UEERE0051 Apply electrical principles to renewable energy design
Please contact us should you wish to discuss your options / possible alternate pathways or visit the Solar Accreditation Australia website for further details.
Grid-Connected PV Systems (Install Only)
In accordance with the Australian Quality Framework, Smart Solar Training is fully committed to ensuring quality education for all students.
In accordance with the requirements of the Outcome Standards for Registered Training Organisations, Smart Solar Training provides the opportunity for students to apply to have prior learning recognised toward a qualification or units of competence for which they are enrolled.
However, please note that Solar Accreditation Australia, the national accreditation scheme operator does not recognise RPL’d candidate records.
Our organisation does not offer entry-level VET sector training.
Students are responsible for obtaining current copies of the following Australian Standards, available for purchase online, and also available from some libraries, institutions and industry associations.
An example of a curated, affordable set of applicable standards here: Standards
- AS/NZS 5033 – Photovoltaic arrays
- AS/NZS 4777.1 – Grid connection of energy systems via inverters
- AS/NZS 3000 – Wiring rules
- AS/NZS 3008.1.1 – Selection of cables Part 1.1
Students enrolled in the course must ensure that they have:
- Computer with a reliable Internet connection
- Scientific calculator
- Email account, which they check regularly
This course consists of two main components, a Theory and a Practical (held at our training facility)
Option:
- Self-paced online Theory + One day Practical
Although it is not mandatory, we recommend completing around 50% self study before attending the training. Some self study will be required with training tutor support included with all our courses.
To support your study planning, please refer to the information below, including the nominal hours as outlined for all units for this course.
Total Nominal Hours: 20
In the context of Registered Training Organisations (RTOs) and Vocational Education and Training (VET), “nominal hours” refer to the anticipated time needed to deliver and assess a unit of competency or module.
You may take longer to complete your unit of competency/competencies or you may take less depending on your experience and any previous training.
The nominal hours is published as a general guide for your information and guidance.
*Start now to get immediate access to your course material.
The validation period of our courses is twelve (12) months.
An unrestricted electrical licence issued by an Australian state or territory is a prerequisite for enrolment in this course.
Please contact us should you wish to discuss your options / possible alternate pathways or visit the Solar Accreditation Australia website for further details.
Battery Storage For Grid-Connected PV Systems (Design & Install)
In accordance with the Australian Quality Framework, Smart Solar Training is fully committed to ensuring quality education for all students.
In accordance with the requirements of the Outcome Standards for Registered Training Organisations, Smart Solar Training provides the opportunity for students to apply to have prior learning recognised toward a qualification or units of competence for which they are enrolled.
However, please note that Solar Accreditation Australia, the national accreditation scheme operator does not recognise RPL’d candidate records.
Our organisation does not offer entry-level VET sector training.
Students are responsible for obtaining current copies of the following Australian Standards, available for purchase online, and also available from some libraries, institutions and industry associations.
An example of a curated, affordable set of applicable standards here: Standards
- AS/NZS 5139 – Electrical installations – Safety of battery systems for use with power conversion equipment
- AS/NZS 4777.1 – Grid connection of energy systems via inverters – Part 1: Installation requirements
- AS/NZS 5033 – Installation and safety requirements for photovoltaic (PV) arrays
- AS/NZS 3000 – Wiring Rules
- AS/NZS 3008.1.1 – Electrical installations – Selection of cables
Enrolled students in this course must also have:
- Computer with a reliable Internet connection
- Scientific calculator
- Email account, checked regularly
This course consists of two main components, a Theory and a Practical (held at our training facility)
Options:
- Self-paced online Theory + One day Practical or ..
- Three days Trainer led online via Zoom Theory + One day Practical or..
- Three days Face to face Classroom Theory + One day Practical
Although it is not mandatory, we recommend completing around 50% self study before attending the training. Some self study will be required with training tutor support included with all our courses.
To support your study planning, please refer to the information below, including the nominal hours as outlined for all units for this course.
Total Nominal Hours: 70
In the context of Registered Training Organisations (RTOs) and Vocational Education and Training (VET), “nominal hours” refer to the anticipated time needed to deliver and assess a unit of competency or module.
You may take longer to complete your unit of competency/competencies or you may take less depending on your experience and any previous training.
The nominal hours is published as a general guide for your information and guidance.
*Start now to get immediate access to your course material.
The validation period of our courses is twelve (12) months.
This course builds on the knowledge of the Grid-Connected PV Systems Design course, so a prerequisite for enrolment is a Statement of Attainment in the following Units of Competency :
-
- UEERE0061: Design grid-connected photovoltaic power supply systems and
An unrestricted electrical licence issued by an Australian state or territory is a prerequisite for enrolment in this course.
Please contact us should you wish to discuss your options, possible alternate pathways including gap training for UEERE0061 or visit the Solar Accreditation Australia website for further details.
Battery Storage For Grid-Connected PV Systems (Design Only)
In accordance with the Australian Quality Framework, Smart Solar Training is fully committed to ensuring quality education for all students.
In accordance with the requirements of the Outcome Standards for Registered Training Organisations, Smart Solar Training provides the opportunity for students to apply to have prior learning recognised toward a qualification or units of competence for which they are enrolled.
However, please note that Solar Accreditation Australia, the national accreditation scheme operator does not recognise RPL’d candidate records.
Our organisation does not offer entry-level VET sector training.
Students are responsible for obtaining current copies of the following Australian Standards, available for purchase online, and also available from some libraries, institutions and industry associations.
An example of a curated, affordable set of applicable standards here: Standards
- AS/NZS 5139 – Electrical installations – Safety of battery systems for use with power conversion equipment
- AS/NZS 4777.1 – Grid connection of energy systems via inverters – Part 1: Installation requirements
- AS/NZS 5033 – Installation and safety requirements for photovoltaic (PV) arrays
- AS/NZS 3000 – Wiring Rules
- AS/NZS 3008.1.1 – Electrical installations – Selection of cables
Students admitted in this course must ensure they have:
- Computer with a reliable Internet connection
- Scientific calculator
- Email account checked regularly
This course consists of a Theory component only.
Options:
- Self-paced online Theory or ..
- Three days Trainer led online via Zoom Theory or ..
- Three days Face to face Classroom Theory
Although it is not mandatory, we recommend completing around 50% self study before attending the training. Some self study will be required with training tutor support included with all our courses.
To support your study planning, please refer to the information below, including the nominal hours as outlined for all units for this course.
Total Nominal Hours: 60
In the context of Registered Training Organisations (RTOs) and Vocational Education and Training (VET), “nominal hours” refer to the anticipated time needed to deliver and assess a unit of competency or module.
You may take longer to complete your unit of competency/competencies or you may take less depending on your experience and any previous training.
The nominal hours is published as a general guide for your information and guidance.
*Start now to get immediate access to your course material.
The validation period of our courses is twelve (12) months.
This course builds on the knowledge of the Grid-Connected PV Systems Design course, so a prerequisite for enrolment is a Statement of Attainment in the following Units of Competency :
-
- UEERE0061: Design grid-connected photovoltaic power supply systems and
- One of:
- UEEEL0039 Design, install and verify compliance and functionality of general electrical installations or
- UEERE0051 Apply electrical principles to renewable energy design
Please contact us should you wish to discuss your options / possible alternate pathways or visit the Solar Accreditation Australia website for further details.
Battery Storage For Grid-Connected PV Systems (Install Only)
In accordance with the Australian Quality Framework, Smart Solar Training is fully committed to ensuring quality education for all students.
In accordance with the requirements of the Outcome Standards for Registered Training Organisations, Smart Solar Training provides the opportunity for students to apply to have prior learning recognised toward a qualification or units of competence for which they are enrolled.
However, please note that Solar Accreditation Australia, the national accreditation scheme operator does not recognise RPL’d candidate records.
Our organisation does not offer entry-level VET sector training.
Students are responsible for obtaining current copies of the following Australian Standards, available for purchase online, and also available from some libraries, institutions and industry associations.
An example of a curated, affordable set of applicable standards here: Standards
- AS/NZS 5139 – Electrical installations – Safety of battery systems for use with power conversion equipment
- AS/NZS 4777.1 – Grid connection of energy systems via inverters – Part 1: Installation requirements
- AS/NZS 5033 – Installation and safety requirements for photovoltaic (PV) arrays
- AS/NZS 3000 – Wiring Rules
- AS/NZS 3008.1.1 – Electrical installations – Selection of cables
Enrolled students have to make sure they have:
- Computer with a reliable Internet connection
- Scientific calculator
- Email account checked regularly
This course consists of two main components, a Theory and a Practical (held at our training facility)
Option:
- Self-paced online Theory + One day Practical
Although it is not mandatory, we recommend completing around 50% self study before attending the training. Some self study will be required with training tutor support included with all our courses.
To support your study planning, please refer to the information below, including the nominal hours as outlined for all units for this course.
Total Nominal Hours: 20
In the context of Registered Training Organisations (RTOs) and Vocational Education and Training (VET), “nominal hours” refer to the anticipated time needed to deliver and assess a unit of competency or module.
You may take longer to complete your unit of competency/competencies or you may take less depending on your experience and any previous training.
The nominal hours is published as a general guide for your information and guidance.
*Start now to get immediate access to your course material.
The validation period of our courses is twelve (12) months.
An unrestricted electrical licence issued by an Australian state or territory is a prerequisite for enrolment in this course.
Please contact us should you wish to discuss your options / possible alternate pathways or visit the Solar Accreditation Australia website for further details.
Important:
*This SAA accreditation type is only available as an ‘additional accreditation type’ to an existing GCPV Design & Installation accreditation (i.e. not as a first accreditation)
Solar Accreditation Australia (SAA) via our Nationally Accredited courses
Attain accreditation with Solar Accreditation Australia (SAA) by successfully completing one of our Nationally Accredited courses. Click the button below to see the available dates or contact us directly.
Contact Us
Solar & Battery Accreditation
CONTACT US
1300 425 615
info@smartsolartraining.com.au
2/4 Lathe St
Virginia
QLD 4014
OTHER COURSES
Grid-Connected PV Systems Design & Install
Grid-Connected PV Systems Design Only
Grid-Connected PV Systems Install Only
Battery Storage Systems for Grid-Connected PV Systems Design & Install
Battery Storage Systems for Grid-Connected PV Systems Design Only
Battery Storage Systems for Grid-Connected PV Systems Install Only
